SI5345A-D08042-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As you can see, it consists of 64 terminations. A voltage of 1.8V should be applied to this electronic frequency generator. The maximal supply voltage this clock generator would take is 1.89V. RF synthesizer is comprised of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. There should be a voltage supply above 1.71V for this frequency generator in order to ensure its safety. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. In this clock-generating clock generator ic, a frequency of 1028MHz is synthesi1028MHzed for high-quality output. Unless the ambient temperature is greater than -40°C, this clock PLL may not start.

SI5345A-D08042-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 1028MHz

SI5345A-D08042-GMR Applications

There are a lot of Silicon Labs SI5345A-D08042-GMR Clock Generators applications.

• Small signal recovery
• Test equipment
• Radio receivers
• Carrier synchronization in wired communication
• Smartphones
• CPUs
• Satellite receivers
• Pagers
• Mobile telephones
• High-speed optical transport network (OTN)