SI5350A-A-GT Overview

As a clock IC, PLLs is packaged using the Tube method. 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) contains this Clock PLL. There are a total of 10 terminations in this file. This clock generator ic should receive a voltage of 2.5V. As the Clock PLL's input, Crystal is designed to be used in order to generate the clock signal. 2 circuits are implemented to access the electronic component's full performance. There is a maximum frequency of 160MHz Max with this clock-based frequency generator. The Surface Mount allows this electrical component to be easily installed on the panel. In terms of supply voltage, RF synthesizer works with 2.25V~3.63V. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in LVCMOS logic that can be used with this clock generator. Clock Generator is the type of electrical part that this component is classified as. In this IC, a 10-bit frequency generator is designed specifically for use in microprocessors. The related electrical components for the base part number SI5350 can be found below. There are a number of 10 pins that are available on the clock generators. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. There are a number of electronic parts in the MultiSynth? series, including this one. Clock PLL is facilitated with 3 signal outputs to magnify output frequency as high as possible. To fully perform its function, time clock generator requires a supply current of 20mA.

SI5350A-A-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V

SI5350A-A-GT Applications

There are a lot of Silicon Labs SI5350A-A-GT Clock Generators applications.

• Modems
• FM demodulation networks for FM operations
• High-frequency induction heating
• Ports
• Test and instrumentation equipment
• GPS systems
• Remote telemetry and instrumentation
• Space communucation
• 1 Gigabit Ethernet
• Peripheral devices