SL23EP08SC-2HT Overview

Clock ICs are packaged using the Tape & Reel (TR) method. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. There are a total of 16 terminations in this file. A voltage of 2.5V should be applied to this electronic frequency generator. In this case, Clock is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 220MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 2.75V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 2.25V is recommended for safety reasons. There are 2.3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. There are several logic levels in LVCMOS logic that can be used with this clock generator. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The related electrical components for the base part number SL23EP08 can be found below. With ALSO OPERATES WITH 3.3V SUPPLY, this clock generator produces better clock signals. The output frequency is magnified as high as possible with 8 signal outputs. The timing skew of this frequency synthesizer is low at 0.3 nsmax.

SL23EP08SC-2HT Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP08SC-2HT Applications

There are a lot of Silicon Labs
SL23EP08SC-2HT Clock Generators applications.

• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel