SI5350A-B04603-GTR Overview

This clock IC is packaged using the Tape & Reel (TR) method. 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) contains this Clock PLL. As a result, frequency synthesizers can be found to contain 10 terminations. The clock generator ic should be grounded with a voltage of 1.8V. Because of the Surface Mount, clock PLL can be easily mounted on the panel. 1.89V would be the maximum supply voltage for this clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. A frequency generator that runs over 85°C may cause ha85°Cards. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. This frequency generator may fail to start up if the ambient temp is lower than -40°C. This frequency synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY to produce better clock signals.

SI5350A-B04603-GTR Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B04603-GTR Applications

There are a lot of Silicon Labs SI5350A-B04603-GTR Clock Generators applications.

• Laptops
• PCI express cards
• DVD recorders
• 1 Gigabit Ethernet
• Space communucation
• Frequency shifting decodes
• Digital circuits
• Telecommunication systems
• Clock generation systems
• Signal analyzer