SI5350A-B04986-GMR Overview

In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 20-VFQFN Exposed Pad package contains this clock generator. It contains a total of 20 terminations within RF synthesizer. This time clock generator should be voltaged at 1.8V. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. It would be possible to supply this clock PLL with 1.89V of power. RF synthesizer is comprised of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. The clock PLL can synthesi200MHze a clock frequency of 200MHz with high quality. If the ambient temperature is below -40°C, the clock PLL may not start up. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.

SI5350A-B04986-GMR Features

Available in the 20-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B04986-GMR Applications

There are a lot of Silicon Labs SI5350A-B04986-GMR Clock Generators applications.

• VSAT (Small Ground Satellite Station)
• High-speed optical transport network (OTN)
• Main oscillator in receiver
• Radar
• Wide area power system
• Carrier synchronization in wired communication
• Cell phones
• Notebooks
• Wireless handsets
• Jitter reduction