SI5350A-B07220-GTR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. As part of the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, this clock generator is embedded. There are 10 terminations found in this file. To operate this time clock generator, 1.8V voltage should be applied. The Surface Mount allows the electrical component to be installed conveniently on the panel. 1.89V would be the maximum supply voltage for this clock generator. CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/peripheral ICs are incorporated in this digital clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. Synthesi200MHzing a clock output frequency of 200MHz is possible with this clock-generator. A clock PLL that starts up at a lower temperature may not function. There is a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature on this frequency generator in order to produce a better clock signal.

SI5350A-B07220-GTR Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B07220-GTR Applications

There are a lot of Silicon Labs
SI5350A-B07220-GTR Clock Generators applications.

• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel
• PCI express cards
• Infotainment systems