SL23EP05BSI-1H Overview

As a clock IC, it is packaged by the Tube method. As you can see, it consists of 8 terminations. Basically, this time clock generator needs a voltage of 2.5V. The maximum voltage this clock PLL can handle is 2.7V. A maximum voltage of 2.3V should be used for this frequency generator for safety reasons. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. ALSO OPERATES AT 3.3V SUPPLY is included in this frequency generator to enhance clock signal output. At maximum 0.1 ns, this analog clock generator has low timing skew. 4 pins enable the digital clock generator's true output. If you search for the SL23 family of parts, you will be able to find similar electrical parts. A PLL BASED CLOCK DRIVER logic circuit uses this time clock generator as its main component. STANDARD input conditioning makes control signals from physical input clock PLLs.

SL23EP05BSI-1H Features

Supply voltage of 2.5V
4 true outputs

SL23EP05BSI-1H Applications

There are a lot of Silicon Labs
SL23EP05BSI-1H Clock Generators applications.

• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange
• Fiber Channel
• PCI express cards
• Infotainment systems
• Medical equipment