74AC574MTR Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. As part of the package Tape & Reel (TR), it is embedded. This output is configured with Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. Temperature is set to -55°C~125°C TA. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74AC series. It should not exceed 250MHzin terms of its output frequency. D latch consists of 1 elements. T flip flop consumes 4μA quiescent energy. Terminations are 20. You can search similar parts based on 74AC574. A voltage of 3.3V is used as the power supply for this D latch. A JK flip flop with a 4pFfarad input capacitance is used here. An electronic device belonging to the family ACcan be found here. The electronic part is mounted in the way of Surface Mount. 20pins are included in its design. This device has Positive Edgeas its clock edge trigger type. The RS flip flops belongs to FF/Latches base part number. An electronic part with 8bits has been designed. Vsup reaches 6V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The flip flop contains 2ports. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are no output lines on the JK flip flop. The number of input lines is 8.
74AC574MTR Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
74AC574MTR Applications
There are a lot of STMicroelectronics 74AC574MTR Flip Flops applications.
- Supports Live Insertion
- Reduced system switching noise
- Counters
- Data storage
- CMOS Process
- Control circuits
- ESD performance
- ESD protection
- Cold spare funcion
- Convert a momentary switch to a toggle switch
