74ACT273MTR Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. There is an embedded version in the package Tape & Reel (TR). Non-Invertedis the output configured for it. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. A temperature of -55°C~125°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. There should be no greater frequency than 190MHzon its output. A total of 1 elements are present. During its operation, it consumes 4μA quiescent energy. 20terminations have occurred. The object belongs to the 74ACT273 family. A voltage of 5V provides power to the D latch. Input capacitance of this device is 4pF farads. ACTis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. An electronic part with 8bits has been designed. In order to achieve its superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A total of 5V power supplies are needed to run it. If high efficiency is desired, the supply voltage should be kept at 5V.
74ACT273MTR Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
74ACT273MTR Applications
There are a lot of STMicroelectronics 74ACT273MTR Flip Flops applications.
- Event Detectors
- Divide a clock signal by 2 or 4
- Patented noise
- Modulo – n – counter
- Asynchronous counter
- Frequency division
- Convert a momentary switch to a toggle switch
- Storage registers
- Bounce elimination switch
- Balanced Propagation Delays
