HCF4052M013TR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -55°C~125°C TA. The total number of terminations is 16. Due to its 4 channels, the electrical component produces high-quality output. A 5V voltage supply should turn on and run the electronic component. It is part of the design of the 16 series that this electronic component is included. On the other hand, analog switches can be constructed using SP4T switching circuits. A 2 circuit is present in this switch device. Using the HCF4052 search parameter, you can discover variants of the switch. It has an internal resistance of 1.05kOhm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 20V volts for the multiplexer. The analog switch ic is of the Dual supply type and is cost-effective. 3V should be the lowest voltage fed to the electronic component. 80nA current would be enough for this multiplexer to operate. An analogue multiplexer drains from a single voltage supply at 3V~20V. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. The electrical component supports 8 inputs. There are various bandwidths available for data transfer. Resistivity from Drain to Source is 1.05kOhm for this electronic part.

HCF4052M013TR Features

4 Channels
Switch Circuit: SP4T
80nA Supply Current
Bandwidth: 60MHz
Drain-to-Source resistance: 1.05kOhm

HCF4052M013TR Applications

There are a lot of STMicroelectronics HCF4052M013TR Analog Switches & Multiplexers ICs applications.

• Video signal routing
• Industrial
• Channel Banks
• FTTH
• ISDN NT1/TA
• PDAs
• Audio/video switches
• Video switching
• Battery Powered Systems
• Sample hold systems