M74HC273B1R Overview
The package is in the form of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. As configured, the output uses Non-Inverted. This trigger uses the value Positive Edge. Through Holeis occupied by this electronic component. A voltage of 2V~6Vis used as the supply voltage. -55°C~125°C TAis the operating temperature. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74HC series. In order for it to function properly, its output frequency should not exceed 66MHz. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 20 terminations have been made. JK flip flop belongs to M74HC273 family. A voltage of 4.5V is used to power it. JK flip flop input capacitance is 5pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. It is mounted by the way of Through Hole. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. This flip flop is designed with 8 Bits. It reaches the maximum supply voltage (Vsup) at 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. To achieve this superior flexibility, 8 circuits are used. An electrical current of 2/6V volts is applied to it. This T flip flop features a maximum design flexibility due to its output current of 5.2mA.
M74HC273B1R Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
M74HC273B1R Applications
There are a lot of STMicroelectronics M74HC273B1R Flip Flops applications.
- QML qualified product
- Set-reset capability
- EMI reduction circuitry
- Asynchronous counter
- Registers
- Test & Measurement
- Guaranteed simultaneous switching noise level
- Counters
- Single Down Count-Control Line
- Individual Asynchronous Resets
