74ABTH16823DGGRG4 Overview
In the form of 56-TFSOP (0.240, 6.10mm Width), it has been packaged. D flip flop is included in the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. A supply voltage of 4.5V~5.5V is required for operation. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74ABTHseries of FPGAs. This D flip flop should not have a frequency greater than 150MHz. D latch consists of 2 elements. As a result, it consumes 500μA quiescent current. The number of terminations is 56. You can search similar parts based on 74ABTH16823. It is powered by a voltage of 5V . Input capacitance of this device is 4pF farads. A device of this type belongs to the family of ABT. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 56 pins. Its clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part with 9bits has been designed. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. A D flip flop with 2embedded ports is available. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With a current output of 64mA , it offers maximum design flexibility. It is designed with 9 output lines.
74ABTH16823DGGRG4 Features
Tape & Reel (TR) package
74ABTH series
56 pins
9 Bits
5V power supplies
74ABTH16823DGGRG4 Applications
There are a lot of Texas Instruments 74ABTH16823DGGRG4 Flip Flops applications.
- Balanced Propagation Delays
- Clock pulse
- ATE
- Shift registers
- Balanced 24 mA output drivers
- Cold spare funcion
- Parallel data storage
- CMOS Process
- Frequency Dividers
- Dynamic threshold performance
