74LVC16374ADGVRG4 Overview
As a result, it is packaged as TFSOP. There are 2 elements in it. In 48terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 1.8V. It is a member of the LVC/LCX/Zfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 48. Its clock edge trigger type is Positive Edge. The flip flop is designed with 16bits. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. There are 3.3V power supplies attached to it. There are 2 ports embedded in the flip flops. It is reported that there are 8 input lines. As a result, it consumes 20μA of quiescent current without being affected by external factors. High level output current is set to -24mA. Low level output current is set to 24mA. A temperature below 125°Cshould be used for operation. Ideally, the operating temperature should be greater than -40°C. The minimal supply voltage is 1.65V. The maximum supply voltage supported by the flip flop is 3.6V. It is possible to achieve a frequency of 150MHz. It adopts a logic IC of type BUS DRIVER. The T flip flop is equipped with 2functions . The JK flip flop has a pin count of 48. 24mA provides maximum design flexibility due to its output current.
74LVC16374ADGVRG4 Features
48 pins
16 Bits
3.3V power supplies
2 Functions
48 pin count
74LVC16374ADGVRG4 Applications
There are a lot of Texas Instruments
74LVC16374ADGVRG4 Flip Flops applications.
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
