CD4013BM96E4 Overview

The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). As part of the package Tape & Reel (TR), it is embedded. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. There is an electronic component mounted in the way of Surface Mount. A 3V~18Vsupply voltage is required for it to operate. It is operating at a temperature of -55°C~125°C TA. This D latch has the type D-Type. It belongs to the 4000Bseries of FPGAs. This D flip flop should not have a frequency greater than 24MHz. There is 4μA quiescent consumption. 14terminations have occurred. If you search by CD4013, you will find similar parts. Power is supplied from a voltage of 5V volts. Its input capacitance is 5pF farads. There is an electronic part mounted in the way of Surface Mount. A total of 14pins are provided on this board. It has a clock edge trigger type of Positive Edge. It is included in FF/Latch. Normally, the supply voltage (Vsup) should be above 3V. 2 circuits are used to achieve its superior flexibility. Considering the reliability of this T flip flop, it is well suited for TR. The JK flip flop is with 1 output lines to operate. It consumes a total of 20μA quiescent current at any given time.

CD4013BM96E4 Features

Tape & Reel (TR) package
4000B series
14 pins

CD4013BM96E4 Applications

There are a lot of Texas Instruments CD4013BM96E4 Flip Flops applications.

• Asynchronous counter
• EMI reduction circuitry
• Buffered Clock
• Set-reset capability
• ESD performance
• Modulo – n – counter
• Event Detectors
• ESCC
• Registers
• Cold spare funcion