CD40175BM96 Overview

In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. The Tape & Reel (TR)package contains it. There is a Differentialoutput configured with it. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. A 3V~18Vsupply voltage is required for it to operate. It is operating at -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 4000B series. It should not exceed 14MHzin its output frequency. There are 1 elements in it. Terminations are 16. The CD40175 family contains it. The power source is powered by 5V. The input capacitance of this JK flip flopis 5pF farads. Electronic part Surface Mountis mounted in the way. This board is designed with 16pins on it. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. The flip flop is designed with 4bits. Normally, the supply voltage (Vsup) should be kept above 3V. On the basis of its reliable performance, this D flip flop is well suited for use with TR. It has 4lines. It consumes a total of 4μA quiescent current at any given time.

CD40175BM96 Features

Tape & Reel (TR) package
4000B series
16 pins
4 Bits

CD40175BM96 Applications

There are a lot of Texas Instruments CD40175BM96 Flip Flops applications.

• Divide a clock signal by 2 or 4
• Single Down Count-Control Line
• Parallel data storage
• Memory
• Instrumentation
• Differential Individual
• Frequency Divider circuits
• Individual Asynchronous Resets
• Consumer
• Latch-up performance