CD74AC374M Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 1.5V~5.5V volts, it operates. -55°C~125°C TAis the operating temperature. The type of this D latch is D-Type. It belongs to the 74ACseries of FPGAs. Its output frequency should not exceed 125MHz Hz. In total, there are 1 elements. A total of 20terminations have been recorded. Members of the 74AC374family make up this object. A voltage of 3.3V is used as the power supply for this D latch. A 10pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the ACfamily. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. It is part of the Bus Driver/Transceiverbase part number family. The design is based on 8bits. It reaches the maximum supply voltage (Vsup) at 5.5V. Its superior flexibility is attributed to its use of 8 circuits. The flip flop contains 2ports. Featuring the maximum design flexibility, it has an output current of 24mA . There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 8μA of quiescent current without being affected by external factors.

CD74AC374M Features

Tube package
74AC series
20 pins
8 Bits

CD74AC374M Applications

There are a lot of Texas Instruments CD74AC374M Flip Flops applications.

• Safety Clamp
• Frequency Divider circuits
• Test & Measurement
• Registers
• Supports Live Insertion
• Consumer
• Data storage
• Differential Individual
• Shift registers
• Synchronous counter