SN74LV174AD Overview

In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. It is included in the package Tube. It is configured with Non-Invertedas an output. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 2V~5.5Vvolts. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74LVseries contain this type of chip. You should not exceed 180MHzin the output frequency of the device. In total, there are 1 elements. There is a consumption of 20μAof quiescent energy. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74LV174family make up this object. It is powered by a voltage of 2.5V . The input capacitance of this JK flip flopis 1.7pF farads. In terms of electronic devices, this device belongs to the LV/LV-A/LVX/Hfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The supply voltage (Vsup) should be kept above 2V for normal operation. Despite its superior flexibility, it relies on 7 circuits to achieve it. The D latch operates on 3.3V volts. This T flip flop features a maximum design flexibility due to its output current of 12mA. It has 2lines.

SN74LV174AD Features

Tube package
74LV series
16 pins
3.3V power supplies

SN74LV174AD Applications

There are a lot of Texas Instruments SN74LV174AD Flip Flops applications.

• Frequency division
• Frequency Dividers
• Synchronous counter
• Circuit Design
• Functionally equivalent to the MC10/100EL29
• EMI reduction circuitry
• Guaranteed simultaneous switching noise level
• Storage Registers
• QML qualified product
• Clock pulse