CD74ACT74ME4 Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). You can find it in the Tubepackage. T flip flop uses Differentialas its output configuration. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. In this case, the operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. The FPGA belongs to the 74ACT series. Its output frequency should not exceed 85MHz Hz. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74ACT74. The power supply voltage is 5V. This T flip flop has a capacitance of 10pF farads at the input. It belongs to the family of electronic devices known as ACT. There is an electronic part mounted in the way of Surface Mount. This board is designed with 14pins on it. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latch. Its superior flexibility is attributed to its use of 2 circuits. The system runs on a power supply of 5V watts. In order to achieve high efficiency, the supply voltage should be maintained at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. The JK flip flop is with 1 output lines to operate. There is a consumption of 4μAof quiescent current from it.
CD74ACT74ME4 Features
Tube package
74ACT series
14 pins
5V power supplies
CD74ACT74ME4 Applications
There are a lot of Texas Instruments CD74ACT74ME4 Flip Flops applications.
- Data storage
- Frequency division
- Supports Live Insertion
- Counters
- Count Modes
- Differential Individual
- Frequency Divider circuits
- Pattern generators
- Load Control
- Data transfer
