CD74FCT374M96G4 Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 4.75V~5.25V. 0°C~70°C TAis the operating temperature. This logic flip flop is classified as type D-Type. It belongs to the 74FCTseries of FPGAs. A frequency of 70MHzshould not be exceeded by its output. D latch consists of 1 elements. There is a consumption of 8μAof quiescent energy. Currently, there are 20 terminations. If you search by 74FCT374, you will find similar parts. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 10pF farads. This D flip flop belongs to the family of FCT. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. There are 8bits in this flip flop. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 5V power supplies. A total of 2ports are embedded in the D flip flop. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 48mA. There are 8 output lines in this JK flip flop.

CD74FCT374M96G4 Features

Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies

CD74FCT374M96G4 Applications

There are a lot of Texas Instruments CD74FCT374M96G4 Flip Flops applications.

• Balanced Propagation Delays
• Buffer registers
• Bus hold
• Functionally equivalent to the MC10/100EL29
• EMI reduction circuitry
• Cold spare funcion
• Synchronous counter
• Computers
• 2 – Bit synchronous counter
• Matched Rise and Fall