CD74HC174E Overview

16-DIP (0.300, 7.62mm)is the packaging method. The package Tubecontains it. T flip flop uses Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Through Hole. A voltage of 2V~6Vis required for its operation. The operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74HCseries contain this type of chip. You should not exceed 35MHzin its output frequency. D latch consists of 1 elements. There have been 16 terminations. Members of the 74HC174family make up this object. The power supply voltage is 4.5V. Its input capacitance is 10pF farads. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part mounted in the way of Through Hole. This board is designed with 16pins on it. It has a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. The flip flop is designed with 6bits. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. The superior flexibility of this product is achieved by using 7 circuits. Featuring the maximum design flexibility, it has an output current of 5.2mA . There is a consumption of 8μAof quiescent current from it. Additionally, it is characterized by DUMMY VAL. There are 6 channels available.

CD74HC174E Features

Tube package
74HC series
16 pins
6 Bits

CD74HC174E Applications

There are a lot of Texas Instruments CD74HC174E Flip Flops applications.

• Cold spare funcion
• Data transfer
• ATE
• Buffered Clock
• Storage registers
• Registers
• Differential Individual
• Dynamic threshold performance
• ESCC
• Frequency Divider circuits