SN74ALS564BDWRG4 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. In the configuration, Tri-State, Invertedis used as the output. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 4.5V~5.5V is required for operation. A temperature of 0°C~70°C TAis considered to be the operating temperature. D-Typeis the type of this D latch. FPGAs belonging to the 74ALSseries contain this type of chip. Its output frequency should not exceed 30MHz Hz. D latch consists of 1 elements. As a result, it consumes 18mA quiescent current and is not affected by external forces. The number of terminations is 20. The object belongs to the 74ALS564 family. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as ALS. It is mounted by the way of Surface Mount. It is designed with 20 pins. In this device, the clock edge trigger type is Positive Edge. The part is included in FF/Latches. An electronic part with 8bits has been designed. 5.5Vis the maximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. It runs on 5Vvolts of power. The D flip flop has no ports embedded. With a current output of 24mA , it offers maximum design flexibility. It has 8lines. Furthermore, it has BROADSIDE VERSION OF 534as a characteristic.
SN74ALS564BDWRG4 Features
Tape & Reel (TR) package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS564BDWRG4 Applications
There are a lot of Texas Instruments SN74ALS564BDWRG4 Flip Flops applications.
- Data storage
- Differential Individual
- Supports Live Insertion
- Guaranteed simultaneous switching noise level
- Automotive
- Communications
- Consumer
- Modulo – n – counter
- Circuit Design
- Common Clocks
