CD74HC377PWRE4 Overview
TSSOPis the way it is packaged. It is included in the package Tape & Reel (TR). In total, it contains 1 elements. There are 20 terminations,Power is supplied from a voltage of 5V volts. HC/UHis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. Despite external influences, it consumes 8μAof quiescent current. In addition, WITH HOLD MODEis a characteristic of it. There is -5.2mA output current at the high level. There is 5.2mA output current at the low level. It is recommended that the operating temperature be lower than 125°C. A temperature above -55°Cshould be used for the operation. Initially, it requires a voltage of 2V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 6V. 60MHzis the maximum frequency that can be achieved. This logic IC is D FLIP-FLOP. A total of 1 functions are provided by this T flip flop. With 20 pins, it is equipped with a low power consumption. As a result of the output current of 5.2mA, the design flexibility is maximized.
CD74HC377PWRE4 Features
Tape & Reel (TR) package
20 pins
1 Functions
20 pin count
CD74HC377PWRE4 Applications
There are a lot of Texas Instruments
CD74HC377PWRE4 Flip Flops applications.
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
