This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operational temperature extended around -55°C~125°C TA. In total, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. This multiplexer is composed of 1 circuits. Try searching with 74HC4051 if you're looking for variants. Internally, this switch multiplexer has a resistance of 160Ohm. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage the electronic part should receive is 2V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. With dual power supplies, you should attach at least 1V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. Operating the 8 inputs requires 8 inputs. The data can be transferred over a wide range of bandwidths, called 180MHz bandwidths. There is 40Ohm Drain to Source resistance on this electronic part.