As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -55°C~125°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 8 channels. Turning on and running the electrical part should be easy with a 4.5V voltage supply. The electrical component body receives 16 pins. Based on SP4T switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 2. 74HC4052 can be used to search for analog multiplexer variants. This digital multiplexer has 160Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. There should be 2V voltage fed to the electrical part below 2V. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. A dual power supply should have at least 1V voltage attached. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. A 185MHz-bandwidth can be used for data transfer. A Drain to Source resistance of 40Ohm is shown for this electronic part. 4-bit operation is possible.