CD74HC4053M Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -55°C~125°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 2 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. A total of 16 pins are injected into the electrical part body. A SPDT switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 3. Using the 74HC4053 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 130Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 2V is the lowest voltage the electrical component should receive. For this digital switch to work, 160μA current would suffice. There is no problem with using dual supply voltage, but it should not exceed 5V. With dual power supplies, you should attach at least 1V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. The 6 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. A Drain to Source resistance of 160Ohm is shown for this electronic part.

CD74HC4053M Features

2 Channels
Switch Circuit: SPDT
160μA Supply Current
Bandwidth: 200MHz
Drain-to-Source resistance: 160Ohm

CD74HC4053M Applications

There are a lot of Texas Instruments
CD74HC4053M Analog Switches & Multiplexers ICs applications.

• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions
• Cellular phones