Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG454EQ-T1-E3

DG454EQ-T1-E3

DG454EQ-T1-E3

Vishay Siliconix

118ns, 97ns SPST - NC 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG454 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

DG454EQ-T1-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 15 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 172.98879mg
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2016
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 7.3Ohm
Terminal Finish MATTE TIN
Additional Feature ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 450mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number DG454
Output SEPARATE OUTPUT
Pin Count 16
Number of Channels 1
Number of Circuits 4
Max Supply Voltage 36V
Min Supply Voltage 12V
Operating Supply Current 100μA
Power Dissipation 450mW
Max Supply Current 100μA
Throw Configuration SPST
Turn On Delay Time 118 ns
Number of Inputs 4
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 97 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 5.3Ohm
Min Dual Supply Voltage 5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 60 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 31pf 34pF
On-state Resistance Match-Nom 0.12Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 118ns, 97ns
Charge Injection 22pC
Channel-to-Channel Matching (ΔRon) 120m Ω
Crosstalk -85dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-off Time-Max 112ns
Normal Position NC
Voltage - Supply, Dual (V±) ±5V~15V
Height 920μm
Length 5.08mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $2.907825 $2.907825
10 $2.743231 $27.43231
100 $2.587955 $258.7955
500 $2.441466 $1220.733
1000 $2.303270 $2303.27
DG454EQ-T1-E3 Product Details

DG454EQ-T1-E3 Overview


Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. The analog switch ics are built using SPST - NC switching circuits. It consists of 4 circuits. Try searching for the analog switch ic with DG454 if you are looking for variants. The internal resistance of this digital multiplexer is 7.3Ohm. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 36V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. A low voltage of 12V should be applied to the electronic component. This multiplexer would work with 100μA current. A digital multiplexer may suffer damage if voltage is applied above 100μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. If you are using a dual power supply, you should attach at least 5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. In order to operate the 4 inputs, there are several steps to follow. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY.

DG454EQ-T1-E3 Features


1 Channels
Switch Circuit: SPST - NC
100μA Supply Current
Additional Features: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY

DG454EQ-T1-E3 Applications


There are a lot of Vishay Siliconix DG454EQ-T1-E3 Analog Switches & Multiplexers ICs applications.

  • Remote Powered Equipment
  • Modems
  • Data Acquisition Systems
  • SDH/SONET multiplexers
  • Intelligent PBX
  • Industrial and process control systems
  • Cable Modem
  • Digital access cross connects
  • Frame Relay Equipment
  • Fiber In The Loop (FITL)

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News