CD74HC4053MG4 Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -55°C~125°C TA extended. By its 2 channels, the electronic component provides high-quality output. Based on SPDT switching circuits, these analog multiplexers work. A 3 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with 74HC4053. It has an internal resistance of 130Ohm. To find out what the 16 pins do, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Dual, Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. There is no problem with using dual supply voltage, but it should not exceed 5V. A dual power supply should have at least 1V voltage attached. Operating 6 inputs is required. 200MHz bandwidths enable data to be transferred. During operation, the multiplexer should not be exposed to a temperature above 125°C. 3 outputs are included in the analogue multiplexer. It is possible to purchase a 16-SOIC package from suppliers.

CD74HC4053MG4 Features

2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 200MHz
Bandwidth: 200MHz

CD74HC4053MG4 Applications

There are a lot of Texas Instruments CD74HC4053MG4 Analog Switches & Multiplexers ICs applications.

• RGB switches
• Public switching systems
• SDH
• DVD-R
• Access Concentrators
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• High reliability control systems
• Precision test equipment
• Remote wireless modules