CD74HC4067E Overview

The electrical component comes in 24-DIP (0.600, 15.24mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. There is 16:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -55°C~125°C TA. A total of 24 terminations have been recorded. The electronic part delivers high-quality output through its 16 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. The electrical component body receives 24 pins. The circuits in this analogue multiplexer number 1. Using the 74HC4067 search parameter, you can discover variants of the switch. This digital multiplexer has 160Ohm internal resistance. Please refer to the datasheets for 24 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 6V. Single supply type digital switch with a low cost. There should be 2V voltage fed to the electrical part below 2V. This multiplexer would work with 8μA current. A voltage of 2V~6V is required for this switch device, which drains from a single voltage source. It is possible to operate 16 inputs. There are various bandwidths available for data transfer.

CD74HC4067E Features

16 Channels
8μA Supply Current
Bandwidth: 89MHz

CD74HC4067E Applications

There are a lot of Texas Instruments CD74HC4067E Analog Switches & Multiplexers ICs applications.

• Video switching
• Cellular phones
• HDTV
• Precision test equipment
• Audio signal routing
• Isolation
• Fiber In The Loop (FITL)
• ISDN NT1/TA
• Communication systems
• Sample-and-hold systems