CD74HC4067M96 Overview

As the electronic part is packed in 24-SOIC (0.295, 7.50mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 16:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C TA. Total terminations are 24. The electronic part provides high-quality output because it has 1 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 24 pins. There are 1 circuits in this switch device. Try searching with 74HC4067 to find analog multiplexer variants. An switch multiplexer with 180Ohm internal resistance has a value of 180Ohm. Datasheets for 24 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2V. An operating current of 8μA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 2V~6V volts. Operating the 16 inputs requires 16 inputs. There are 89MHz bandwidths for data transfer. It has a Drain to Source resistance of 180Ohm ohms.

CD74HC4067M96 Features

1 Channels
8μA Supply Current
Bandwidth: 89MHz
Drain-to-Source resistance: 180Ohm

CD74HC4067M96 Applications

There are a lot of Texas Instruments
CD74HC4067M96 Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement