CD74HCT173ME4 Overview
The item is packaged in SOICcases. In total, it contains 1 elements. A total of 16 terminations have been made. A voltage of 5V is used to power it. An electronic device belonging to the family HCTcan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. The D latch operates on 5V volts. For high efficiency, the supply voltage should be set to 5V. In order to operate, the chip has 3 output lines. It consumes 8μA current. As an additional reference, you may refer to electronic flip flop WITH DUAL OUTPUT ENABLE. -6mAis set as the high level output current. There is no low level output current set at 6mA. Temperatures below 125°Care ideal for operating. Temperatures above -55°Cshould be used. The minimum voltage required for operation is 4.5V. 5.5Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 60MHz. It uses the logic IC D FLIP-FLOP. There are 1 functions associated with the JK flip flop. 16pins are provided on the D latch.
CD74HCT173ME4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74HCT173ME4 Applications
There are a lot of Texas Instruments
CD74HCT173ME4 Flip Flops applications.
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
- Modulo – n – counter
