SN74AHC374PWRE4 Overview
As a result, it is packaged as TSSOP. The package Tape & Reel (TR)contains it. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 3.3V. It is a member of the AHC/VHC/H/U/Vfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. The part is included in Bus Driver/Transceiver. The flip flop is designed with 8bits. The superior flexibility of this product is achieved by using 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. There are 2 ports embedded in the flip flops. It is designed with 1 output lines. It is reported that there are 3 input lines. High level output current is set to -8mA. Low level output current is set to 8mA. A temperature below 125°Cshould be used for operation. Ideally, the operating temperature should be greater than -40°C. The minimal supply voltage is 2V. The maximum supply voltage supported by the flip flop is 5.5V. It is possible to achieve a frequency of 120MHz. It adopts a logic IC of type BUS DRIVER. The T flip flop is equipped with 1functions . The JK flip flop has a pin count of 20. 8mA provides maximum design flexibility due to its output current.
SN74AHC374PWRE4 Features
Tape & Reel (TR) package
20 pins
8 Bits
1 Functions
20 pin count
SN74AHC374PWRE4 Applications
There are a lot of Texas Instruments
SN74AHC374PWRE4 Flip Flops applications.
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
