CY74FCT2574TSOCTE4 Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74FCTseries of FPGAs. There should be no greater frequency than 250MHzon its output. The list contains 1 elements. It consumes 200μA of quiescent A total of 20 terminations have been made. The 74FCT2574family includes it. It is powered from a supply voltage of 5V. A JK flip flop with a 5pFfarad input capacitance is used here. This D flip flop belongs to the family of FCT. It is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. 8bits are used in its design. As soon as Vsup reaches 5.25V, the maximum supply voltage is reached. A normal operating voltage (Vsup) should remain above 4.75V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. This D flip flop is equipped with 0 ports. To operate, the chip has a total of 3 output lines. A total of 8input lines have been provided.

CY74FCT2574TSOCTE4 Features

Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies

CY74FCT2574TSOCTE4 Applications

There are a lot of Texas Instruments CY74FCT2574TSOCTE4 Flip Flops applications.

• Memory
• Automotive
• Data Synchronizers
• Guaranteed simultaneous switching noise level
• CMOS Process
• Single Up Count-Control Line
• Consumer
• Counters
• Load Control
• Storage registers