SN74AUC16374ZQLR Overview

The item is packaged in 56-VFBGAcases. D flip flop is included in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. The supply voltage is set to 0.8V~2.7V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74AUC series. It should not exceed 250MHzin its output frequency. In total, there are 2 elements. During its operation, it consumes 20μA quiescent energy. A total of 56terminations have been recorded. The 74AUC16374 family contains this object. It is powered from a supply voltage of 1.2V. There is 3pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as AUC. In this case, the electronic component is mounted in the way of Surface Mount. 56pins are included in its design. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 16bits in this flip flop. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The flip flop has 2ports embedded within it. There are no output lines on the JK flip flop.

SN74AUC16374ZQLR Features

Tape & Reel (TR) package
74AUC series
56 pins
16 Bits

SN74AUC16374ZQLR Applications

There are a lot of Texas Instruments SN74AUC16374ZQLR Flip Flops applications.

• Differential Individual
• Frequency Dividers
• Parallel data storage
• 2 – Bit synchronous counter
• Set-reset capability
• Shift registers
• Single Up Count-Control Line
• ATE
• Test & Measurement
• Divide a clock signal by 2 or 4