CD74HCT4053PWR Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Cut Tape (CT) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 16. A high-quality output is provided by the electrical component's 3 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. These analog multiplexers are built based on SPDT switching circuits. This multiplexer is composed of 3 circuits. Try searching for the analog switch ic with 74HCT4053 if you are looking for variants. It has an internal resistance of 130Ohm. To find out what the 16 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 4.5V. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. Operating voltages range from 5V. A 6 input needs to be operated. There are 200MHz bandwidths for data transfer. 2-bits are supported.

CD74HCT4053PWR Features

3 Channels
Switch Circuit: SPDT
Bandwidth: 200MHz
2-Bit

CD74HCT4053PWR Applications

There are a lot of Texas Instruments CD74HCT4053PWR Analog Switches & Multiplexers ICs applications.

• Video switching
• Industrial and process control systems
• Mechanical reed relay replacement
• Video signal routing
• Data Acquisition Systems
• E1 Multiplexer
• High-Voltage
• Cellular phones
• Audio and video routing
• PDAs