CD74HCT574QPWREP Overview

The package is in the form of 20-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. The operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74HCTseries of FPGAs. There should be no greater frequency than 60MHzon its output. There are 1 elements in it. A total of 20 terminations have been made. If you search by 74HCT574, you will find similar parts. It is powered by a voltage of 5V . Input capacitance of this device is 10pF farads. The electronic device belongs to the HCTfamily. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. In light of its reliable performance, this T flip flop is well suited for TR. The system runs on a power supply of 5V watts. This flip flop has a total of 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. Currently, there are 8 input lines present. It consumes 8μA of quiescent current without being affected by external factors.

CD74HCT574QPWREP Features

Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies

CD74HCT574QPWREP Applications

There are a lot of Texas Instruments CD74HCT574QPWREP Flip Flops applications.

• Digital electronics systems
• Buffer registers
• Individual Asynchronous Resets
• Computing
• Data Synchronizers
• Automotive
• Parallel data storage
• Latch-up performance
• Data transfer
• Data storage