As a clock IC, it uses the Tube package. A Clock PLL is included with the 28-SSOP (0.209, 5.30mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 28 terminations can be found in frequency synthesizer. Clock generator ics require a voltage of 3.3V. TTL is designed as this clock generator's input. For a full understanding of the electronic part's performance, 1 circuits are implemented. Because of the Surface Mount, clock PLL can be easily mounted on the panel. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. Clock generator ic works with 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. This is a clock generator compatible with LVTTL logic levels. PLL Clock Driver is the type of electrical part that this component is classified as. It is a 28-bit IC that is designed for microprocessors specifically. CDC536 is the base part number for finding related electronic parts. There is an available 28 pin on the clock generators. The supply voltage should be maintained at 3.3V for high efficiency. As a result, it is commonly classified as a type of Clock Drivers clock PLL. Clock PLL is facilitated with 6 signal outputs to magnify output frequency as high as possible. Low timing skew is provided by this analog clock generator at maximum 0.5 ns. 536-family electronic parts are similar. At frequencies of 100MHz, RF synthesizer achieves high efficiency. As a result, the load capacitance of this PLL is 30pF.
CDC536DB Features
Available in the 28-SSOP (0.209, 5.30mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V Load capacitance of 30pF
CDC536DB Applications
There are a lot of Texas Instruments CDC536DB Clock Generators applications.