In order to package it as a clock IC, the Tape & Reel (TR) package is used. There is a clock generator embedded in the 40-VFQFN Exposed Pad package. In it, there are 40 terminations to be found. A voltage of 2.5V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be SSTL-2. For full access to the electronic component's capabilities, 1 circuits are implemented. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. This clock generator would require a maximum supply voltage of 2.7V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.3V. As long as there are 2.3V~2.7V supply voltages provided, clock generator ic should work. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. An electrical part such as this one can be classified as a PLL Clock Driver component. An IC that generates clocks specifically for microprocessors, this clock PLL is 40-bits in si40e. You can find related electrical components to the base part number CDCVF857. There are 40 pins that are available on the frequency generator. There is a maximum supply voltage of 2.5V that this analog clock generator can handle. The device is usually classified as a type of Clock Drivers device. The frequency synthesizer features 10 signal outputs to ensure as high a frequency as possible. At 0.04 ns Max, this clock generator offers low timing skew. By searching for the 857 family, it is possible to find similar electrical components. At 220MHz, frequency synthesizer achieves high efficiency.
CDCVF857RTBT Features
Available in the 40-VFQFN Exposed Pad Supply voltage of 2.5V Operating supply voltage of 2.5V
CDCVF857RTBT Applications
There are a lot of Texas Instruments CDCVF857RTBT Clock Generators applications.