CLV4051ATPWRG4Q1 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. The operating temperature is extended to around -40°C~105°C TA. The total number of terminations is 16. A electrical component with 8 channels is capable of high-quality output. With a 2.3V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. There are 1 circuits in this switch device. Using the 74LV4051 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 75Ohm. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 20μA current. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. There are 8 inputs to be operated. This switch operates within the bandwidth of 35MHz. From the Automotive, AEC-Q100 series.

CLV4051ATPWRG4Q1 Features

8 Channels
20μA Supply Current
Bandwidth: 35MHz

CLV4051ATPWRG4Q1 Applications

There are a lot of Texas Instruments CLV4051ATPWRG4Q1 Analog Switches & Multiplexers ICs applications.

• Sample-and-hold systems
• DVD-R
• Multi-Line E1 Interface Cards
• Digital access cross connects
• Cable Modem
• E1 Multiplexer
• Channelized and Unchannelized DS3 applications
• Precision instrumentation
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• E1 Network Equipment