CY74FCT2374ATQCTE4 Overview
The package is in the form of 20-SSOP (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. This output is configured with Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. The FPGA belongs to the 74FCT series. Its output frequency should not exceed 250MHz. The element count is 1 . As a result, it consumes 200μA quiescent current. There have been 20 terminations. Members of the 74FCT2374family make up this object. A voltage of 5V is used as the power supply for this D latch. Input capacitance of this device is 5pF farads. This D flip flop belongs to the family of FCT. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part designed with 8bits is used in this application. The maximal supply voltage (Vsup) reaches 5.25V. The supply voltage (Vsup) should be kept above 4.75V for normal operation. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. An electrical current of 5V volts is applied to it. This D flip flop is equipped with 0 ports. The 12mA output current allows it to be designed with the greatest amount of flexibility. There are no output lines on the JK flip flop. It is reported that there are 8 input lines.
CY74FCT2374ATQCTE4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2374ATQCTE4 Applications
There are a lot of Texas Instruments CY74FCT2374ATQCTE4 Flip Flops applications.
- ESCC
- Data storage
- Circuit Design
- Common Clocks
- Latch-up performance
- Latch
- Power down protection
- Dynamic threshold performance
- Digital electronics systems
- Data transfer
