CY74FCT2374CTQCT Overview
It is packaged in the way of 20-SSOP (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.75V~5.25V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74FCTseries FPGA. There should be no greater frequency than 250MHzon its output. A total of 1elements are contained within it. As a result, it consumes 200μA of quiescent current without being affected by external factors. 20terminations have occurred. The 74FCT2374 family contains it. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 5pFfarads. In this case, the D flip flop belongs to the FCTfamily. Electronic part Surface Mountis mounted in the way. It is designed with 20 pins. In this device, the clock edge trigger type is Positive Edge. The part is included in FF/Latches. This flip flop is designed with 8 Bits. As soon as 5.25Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be maintained above 4.75V for normal operation. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch operates on 5V volts. The flip flop contains 2ports. This T flip flop features a maximum design flexibility due to its output current of 12mA. There are 3 output lines on it. This input has 8lines in it.
CY74FCT2374CTQCT Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2374CTQCT Applications
There are a lot of Texas Instruments CY74FCT2374CTQCT Flip Flops applications.
- Memory
- Single Up Count-Control Line
- Memory
- Divide a clock signal by 2 or 4
- QML qualified product
- Convert a momentary switch to a toggle switch
- Frequency Dividers
- Load Control
- Frequency Divider circuits
- Balanced 24 mA output drivers
