CD40175BPWG4 Overview
In the form of 16-TSSOP (0.173, 4.40mm Width), it has been packaged. You can find it in the Tubepackage. This output is configured with Differential. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 3V~18Vis required for its operation. Currently, the operating temperature is -55°C~125°C TA. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 4000Bseries FPGA. This D flip flop should not have a frequency greater than 14MHz. A total of 1 elements are present. This process consumes 4μA quiescents. A total of 16 terminations have been made. You can search similar parts based on CD40175. Power is supplied from a voltage of 5V volts. This T flip flop has a capacitance of 5pF farads at the input. The electronic part is mounted in the way of Surface Mount. The 16pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. There are 4bits in its design. Normal operation requires a supply voltage (Vsup) above 3V. There are 4 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
CD40175BPWG4 Features
Tube package
4000B series
16 pins
4 Bits
CD40175BPWG4 Applications
There are a lot of Texas Instruments CD40175BPWG4 Flip Flops applications.
- High Performance Logic for test systems
- Memory
- Computers
- Clock pulse
- Guaranteed simultaneous switching noise level
- Convert a momentary switch to a toggle switch
- Frequency Dividers
- 2 – Bit synchronous counter
- ATE
- Single Down Count-Control Line
