CY74FCT2374CTQCTG4 Overview
20-SSOP (0.154, 3.90mm Width)is the packaging method. The package Tape & Reel (TR)contains it. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. A temperature of -40°C~85°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74FCTseries of FPGAs. This D flip flop should not have a frequency greater than 250MHz. In total, it contains 1 elements. It consumes 200μA of quiescent A total of 20 terminations have been made. JK flip flop belongs to 74FCT2374 family. Power is provided by a 5V supply. This T flip flop has a capacitance of 5pF farads at the input. A device of this type belongs to the family of FCT. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. It is designed with 8bits. As soon as Vsup reaches 5.25V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be above 4.75V. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. The D flip flop is embedded with 2ports. The output current of 12mA makes it feature maximum design flexibility. The JK flip flop is with 8 output lines to operate.
CY74FCT2374CTQCTG4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2374CTQCTG4 Applications
There are a lot of Texas Instruments CY74FCT2374CTQCTG4 Flip Flops applications.
- Registers
- Supports Live Insertion
- Count Modes
- Matched Rise and Fall
- QML qualified product
- Latch-up performance
- CMOS Process
- Buffered Clock
- Modulo – n – counter
- Storage Registers
