4.75V~5.25V 250MHz 8 Bit D-Type Flip Flop DUAL 74FCT2374 20 Pins 200μA 74FCT Series 20-SOIC (0.295, 7.50mm Width)
SOT-23
CY74FCT2374TSOCTG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
20-SOIC (0.295, 7.50mm Width)
Number of Pins
20
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Series
74FCT
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
20
Type
D-Type
Subcategory
FF/Latches
Packing Method
TAPE AND REEL
Technology
CMOS
Voltage - Supply
4.75V~5.25V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Supply Voltage
5V
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
74FCT2374
Function
Standard
Qualification Status
Not Qualified
Output Type
Tri-State, Non-Inverted
Number of Elements
1
Polarity
Non-Inverting
Supply Voltage-Max (Vsup)
5.25V
Power Supplies
5V
Supply Voltage-Min (Vsup)
4.75V
Load Capacitance
50pF
Number of Ports
2
Number of Bits
8
Clock Frequency
250MHz
Propagation Delay
10 ns
Turn On Delay Time
2 ns
Family
FCT
Current - Quiescent (Iq)
200μA
Output Characteristics
3-STATE WITH SERIES RESISTOR
Current - Output High, Low
15mA 12mA
Max Propagation Delay @ V, Max CL
10ns @ 5V, 50pF
Trigger Type
Positive Edge
Input Capacitance
5pF
Number of Output Lines
8
Clock Edge Trigger Type
Positive Edge
Height Seated (Max)
2.65mm
Width
7.5mm
RoHS Status
ROHS3 Compliant
CY74FCT2374TSOCTG4 Product Details
CY74FCT2374TSOCTG4 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. The package Tape & Reel (TR)contains it. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. It operates with a supply voltage of 4.75V~5.25V. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. The 74FCTseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 250MHz. The list contains 1 elements. As a result, it consumes 200μA quiescent current and is not affected by external forces. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74FCT2374 family. The power supply voltage is 5V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. FCTis the family of this D flip flop. It is mounted in the way of Surface Mount. There are 20pins on it. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. It reaches 5.25Vwhen the maximum supply voltage (Vsup) is applied. It is imperative that the supply voltage (Vsup) is maintained above 4.75Vin order to ensure normal operation. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 5V power supplies. There are 2 ports embedded in the flip flops. In order for the chip to function, it has 8output lines.
CY74FCT2374TSOCTG4 Features
Tape & Reel (TR) package 74FCT series 20 pins 8 Bits 5V power supplies
CY74FCT2374TSOCTG4 Applications
There are a lot of Texas Instruments CY74FCT2374TSOCTG4 Flip Flops applications.