CY74FCT2574TSOCE4 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. D flip flop is embedded in the Tube package. The output it is configured with uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74FCT series. Its output frequency should not exceed 250MHz Hz. A total of 1elements are contained within it. As a result, it consumes 200μA quiescent current. The number of terminations is 20. JK flip flop belongs to 74FCT2574 family. The power source is powered by 5V. Input capacitance of this device is 5pF farads. FCTis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. The flip flop is designed with 8bits. As soon as 5.25Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be maintained above 4.75V for normal operation. The superior flexibility of this product is achieved by using 8 circuits. It operates from 5V power supplies. The flip flop has 2embedded ports. The JK flip flop is with 3 output lines to operate.
CY74FCT2574TSOCE4 Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2574TSOCE4 Applications
There are a lot of Texas Instruments CY74FCT2574TSOCE4 Flip Flops applications.
- Synchronous counter
- Automotive
- High Performance Logic for test systems
- Common Clocks
- EMI reduction circuitry
- Load Control
- Latch-up performance
- Frequency Dividers
- Storage registers
- Consumer
