CY74FCT574ATSOC Overview

In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 4.75V~5.25V. The operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74FCTseries of FPGAs. D latch consists of 1 elements. It consumes 200μA of quiescent current without being affected by external factors. A total of 20 terminations have been made. The 74FCT574 family contains this object. An input voltage of 5Vpowers the D latch. There is 5pF input capacitance for this T flip flop. FCTis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 20 pins. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. The flip flop is designed with 8bits. 8 circuits are used to achieve its superior flexibility. An electrical current of 5V volts is applied to it. The flip flop has 2embedded ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. As a result of its output current of 64mA, it is very flexible in terms of design. There are no output lines on the JK flip flop. It is possible to achieve a frequency of 250MHz.

CY74FCT574ATSOC Features

Tube package
74FCT series
20 pins
8 Bits
5V power supplies

CY74FCT574ATSOC Applications

There are a lot of Texas Instruments CY74FCT574ATSOC Flip Flops applications.

• Dynamic threshold performance
• Data storage
• Common Clocks
• Shift Registers
• Shift registers
• Frequency division
• Storage registers
• ESD protection
• Computing
• Individual Asynchronous Resets