FCT162823CTPACTE4 Overview

The package is in the form of 56-TFSOP (0.240, 6.10mm Width). It is contained within the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The 74FCTseries comprises this type of FPGA. D latch consists of 2 elements. As a result, it consumes 500μA quiescent current. There have been 56 terminations. If you search by 74FCT162823, you will find similar parts. A voltage of 5V is used to power it. Its input capacitance is 4.5pFfarads. FCTis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 56 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. 9bits are used in its design. It reaches the maximum supply voltage (Vsup) at 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The D latch runs on a voltage of 5V volts. The flip flop contains 2ports. With an output current of 24mA, this device offers maximum design flexibility. The number of input lines is 9.

FCT162823CTPACTE4 Features

Tape & Reel (TR) package
74FCT series
56 pins
9 Bits
5V power supplies

FCT162823CTPACTE4 Applications

There are a lot of Texas Instruments FCT162823CTPACTE4 Flip Flops applications.

• Safety Clamp
• Individual Asynchronous Resets
• Single Down Count-Control Line
• Patented noise
• Buffer registers
• Computing
• Synchronous counter
• Test & Measurement
• Frequency Divider circuits
• EMI reduction circuitry