LM25118MH/NOPB Overview

This switching controller fits most application requirements since it is packaged in a 20-PowerTSSOP (0.173, 4.40mm Width) package. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 3V~42V is the operating voltage and supply voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. Using this switching controller, it is possible to switch at Up to 500kHz. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Ramp, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 20 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 24V. Search for "LM25118" to find other relevant dc to dc converter ics. In total, switching converter has 20 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. As determined by the test statistics, the output voltage of DC regulator is 38V. normally, the dc dc regulator's output current is 3.5A, which you should keep in mind when starting a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 75 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulator has a maximum frequency of 575kHz. As long as the dc switching is in a dormant state, it utilizes 4.5mA. Because the dc switcher's maximum input voltage is 42V users must limit the voltage accordingly. A voltage of 3V is required for the supply. Input current cannot exceed 4A with this dc switcher. A datasheet states that the switching converter can output 38V volts at its maximum. The supply current of the voltage controller is 4.5mA. Neither the voltage controller's lowest voltage output 1.23Vr its highest voltage output is less than 1.23V. Switches with 1 phases are used in this controller.

LM25118MH/NOPB Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %

LM25118MH/NOPB Applications

There are a lot of Texas Instruments LM25118MH/NOPB DC to DC converter applications.

• Pipe bending machines
• Electrical power transmission
• Adjustable voltage or current linear circuits
• Electric heating, lighting
• Window air conditioners
• Hydro power
• Network technology
• Power supplies of electronic gadgets
• Various CNC machine tools
• Bending machines