SN74ABT16823DLG4 Overview

56-BSSOP (0.295, 7.50mm Width)is the packaging method. As part of the package Tube, it is embedded. As configured, the output uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. The 74ABTseries comprises this type of FPGA. A frequency of 150MHzshould be the maximum output frequency. In total, it contains 2 elements. T flip flop consumes 500μA quiescent energy. 56terminations have occurred. It is a member of the 74ABT16823 family. A voltage of 5V is used to power it. This JK flip flop has a 3.5pFfarad input capacitance. This D flip flop belongs to the family of ABT. This electronic part is mounted in the way of Surface Mount. It is designed with 56 pins. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with 18bits. In order for the device to operate, it requires 5V power supplies. The D flip flop is embedded with 2ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The 64mA output current allows it to be designed with the greatest amount of flexibility. In order for the chip to function, it has 9output lines. Additionally, there are WITH CLEAR AND CLOCK ENABLE on the electronic flip flop that can be referred to.

SN74ABT16823DLG4 Features

Tube package
74ABT series
56 pins
18 Bits
5V power supplies

SN74ABT16823DLG4 Applications

There are a lot of Texas Instruments SN74ABT16823DLG4 Flip Flops applications.

• Power down protection
• Test & Measurement
• ESD performance
• Convert a momentary switch to a toggle switch
• Set-reset capability
• Digital electronics systems
• Latch-up performance
• Control circuits
• Buffer registers
• High Performance Logic for test systems