Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74AC564DWRG4

SN74AC564DWRG4

SN74AC564DWRG4

Texas Instruments

2V~6V 95MHz 8 Bit D-Type Flip Flop DUAL 74AC564 20 Pins 4μA 74AC Series 20-SOIC (0.295, 7.50mm Width)

SOT-23

SN74AC564DWRG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature-40°C~85°C TA
PackagingTape & Reel (TR)
Series 74AC
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Type D-Type
Additional FeatureBROADSIDE VERSION OF 534
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Supply Voltage 3.3V
[email protected] Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74AC564
Function Standard
Qualification StatusNot Qualified
Output Type Tri-State, Inverted
Number of Elements 1
Polarity Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies3.3/5V
Supply Voltage-Min (Vsup) 2V
Load Capacitance50pF
Number of Ports2
Output Current24mA
Number of Bits 8
Clock Frequency 95MHz
Propagation Delay14 ns
Turn On Delay Time4.9 ns
Family AC
Logic Function D-Type, Flip-Flop
Current - Quiescent (Iq) 4μA
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Max I(ol) 0.024 A
Max Propagation Delay @ V, Max CL 10.5ns @ 5V, 50pF
Trigger Type Positive Edge
Input Capacitance4.5pF
Number of Input Lines 8
Clock Edge Trigger Type Positive Edge
Height Seated (Max) 2.65mm
Width 7.5mm
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:1483 items

SN74AC564DWRG4 Product Details

SN74AC564DWRG4 Overview


In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. There is an embedded version in the package Tape & Reel (TR). There is a Tri-State, Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. The operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. It belongs to the 74ACseries of FPGAs. You should not exceed 95MHzin the output frequency of the device. The list contains 1 elements. As a result, it consumes 4μA quiescent current. A total of 20 terminations have been made. You can search similar parts based on 74AC564. An input voltage of 3.3Vpowers the D latch. This JK flip flop has a 4.5pFfarad input capacitance. It belongs to the family of electronic devices known as AC. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. There are 8bits in its design. In this case, the maximum supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 3.3/5V power supplies are needed to run it. This flip flop has a total of 2ports. The 24mA output current allows it to be designed with the greatest amount of flexibility. The number of input lines is 8. Additionally, it is characterized by BROADSIDE VERSION OF 534.

SN74AC564DWRG4 Features


Tape & Reel (TR) package
74AC series
20 pins
8 Bits
3.3/5V power supplies

SN74AC564DWRG4 Applications


There are a lot of Texas Instruments SN74AC564DWRG4 Flip Flops applications.

  • QML qualified product
  • Data storage
  • Divide a clock signal by 2 or 4
  • Asynchronous counter
  • Load Control
  • Count Modes
  • Functionally equivalent to the MC10/100EL29
  • Data transfer
  • Storage registers
  • Buffer registers

Get Subscriber

Enter Your Email Address, Get the Latest News