SN74LS173ANSRE4 Overview
The flip flop is packaged in 16-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 4.75V~5.25V. Temperature is set to 0°C~70°C TA. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74LS series. It should not exceed 50MHzin its output frequency. D latch consists of 1 elements. 16terminations have occurred. You can search similar parts based on 74LS173. An input voltage of 5Vpowers the D latch. In this case, the D flip flop belongs to the LSfamily. It is mounted by the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. This T flip flop features a maximum design flexibility due to its output current of 24mA. Currently, there are 2 lines of input.
SN74LS173ANSRE4 Features
Tape & Reel (TR) package
74LS series
16 pins
5V power supplies
SN74LS173ANSRE4 Applications
There are a lot of Texas Instruments SN74LS173ANSRE4 Flip Flops applications.
- Buffer registers
- Dynamic threshold performance
- Individual Asynchronous Resets
- Data transfer
- High Performance Logic for test systems
- 2 – Bit synchronous counter
- Data Synchronizers
- Circuit Design
- Convert a momentary switch to a toggle switch
- Patented noise
